SCHULLER VITO Manual Del Usuario página 15

7. INSTALL THE LIGHT
A- Take off the screws from round plate and keep it.
B- Plug the Output wires from driver into the connectors on LED board.(Fig.14)
C- Install the lamp plate to the
D-.Tighten the screws properly. (Fig.16)
8. INSTALL THE LAMP
Fit the lamp diffuser (shade) by aligning the grooves on the
the metal ring and rotate
KIT.
lamp plate base by screws.(Fig.15)
SHADE.
it by clockwise.(Fig.17,Fig.18)
15
shade with the supports on