Midwest Feline Nuvo Carnival Instrucciones De Montaje página 2

assembly InstructIons
Attach the Circular Cubby (C) to the Bottom Platform (A)
1.
using the Hardware Screw with Plastic Cap (B). Use the
Allen Wrench (L) to tighten. Attach to the hole closest to
the center.
Insert the LONG threads of the Dual Threaded Screw (D)
2.
into the Long Sisal-Wrapped Tube (E). Use a Flathead
Screwdriver to tighten. Then, screw the Sisal-Wrapped
Tube into the Bottom Platform. NOTE: The SHORT threads
go down into the Platform.
Insert the LONG threads of the Dual Threaded Screw (H)
3.
into the Short Sisal-Wrapped Tube (G). Use a Flathead
Screwdriver to tighten. Attach the Sisal-Wrapped Tube to
the Top Platform (J) by screwing the SHORT threads of the
Dual Threaded Screw into the threaded insert on the
bottom of the Platform.
Place the Top Platform on the Long Sisal-Wrapped Tube,
4.
aligning the Short Sisal-Wrapped Tube over the hole on
top of the Circular Cubby.
5. Attach the Short Sisal-Wrapped Tube to the Circular Cubby
using the Hardware Screw with Washer (F). The washer
should be placed on the screw before inserting the screw
up through the top of the Cubby. Use the Allen Wrench (L)
to tighten.
IMPORTANT NOTE:
SHORT threads go
down into the base.
1
IMPORTANT NOTE:
SHORT threads go
up in the platform.
2