Beam Precision Manual Del Equipo página 4

1. Poly-V Belt – The poly-v belt is designed for positive drive, and it will not stretch or slip.
The long life of the sturdy poly-v belt also reduces the need for frequent replacement.
2. LED Lamp – The super bright light of the LED (Light Emitting Diode) lamp allows for better vision
in poorly lit areas. It is also much more durable than incandescent or halogen bulbs.
3. Height Adjustment Pedal – The cleaning height can be adjusted by stepping on the Height Adjustment
Pedal located on the rear of the powerbrush, near the wand release. The height will change between
LO, MED, HIGH and X-HI. The X-HI height should be used on extra high carpet pile or ultra plush
style carpets. BEAM PRECISION SHOULD NOT BE USED TO CLEAN SHAG CARPET STYLES.
4. Height Adjustment LED Indicator– The Carpet Height Indicators located in the display panel on the
hood of the powerbrush (see figure 2) will glow red in color depending on the height setting. At the
lowest setting one LED will be illuminated, and at the highest setting all four LEDs will be illuminated.
5. Check Brushroll – The electronic circuit breaker protects the motor and the poly-v belt from damage
should a motor stall occur due to accidental pick up of a large object. The brush roll image located
in the display panel on the hood of the powerbrush (see figure 2) will glow red in color for a stalled or
jammed condition.
CAUTION! TO REDUCE THE RISK OF INJURY, BRUSH ROLL COULD SUDDENLY RESTART,
UNPLUG BEFORE SERVICING.
6. When brush roll jam has been cleared, circuit breaker can be reset by switching powerbrush switch
"off" then "on". Your Powerbrush must be serviced by an authorized service center if it continues to
trip the circuit breaker.
7. Neck Release Pedal – The handle and wand is released from the upright position by stepping on the
Neck Release Pedal and pulling the handle back. When returned to the upright position, the neck will
lock in place.
8. Wand Quick Release - The quick release neck (see figure 2) releases the wand from the powerbrush
by stepping on the neck peddle.
9. Isolated Brush Compartment – The electrical compartment is totally separated from the sweeping area.
This provides user safety and shields the electric motor from dust and dirt to enhance motor life.
Height Adjustment LED Indicator
Brush Roll Clean Pedal
LED Lights
4
POWERBRUSH FEATURES
POWERBRUSH PARTS IDENTIFICATION
Height Adjustment Pedal
Wand Quick Release
Check Brushroll Indicator
(glows red in color for a stalled
or jammed condition)
Neck Release Pedal
Figure 2.