Steelcase Ology Instrucciones De Montaje página 6

®
12.
Base brackets need to be broken apart before they can be installed.
Bend at parting line to separate (12a). Drill (2) holes into back of unit
using 1/8" drill bit (12b). Install base brackets as shown with (4) Tapping Screws,
Truss Head, 10-12 x .625 provided in kit (12c).
WIRE MANAGER
12a
OLOGY ONLY
12b
1/8"
DRILL BIT
WIRE MANAGER
12c
TAPPING SCREW -
TRUSS HEAD, 10-12 x .625
Page 6 of 33
92555 Rev F