Blendtec COMMERCIAL Serie Manual Del Propietario Y Guia Del Usuairo página 32

In-Counter Installation
• Feed the electrical cord through the hole in the countertop�
• Gently place the blender unit into the hole�
• Ensure the gasket is seated correctly, lying flat against the counter surface and
not pinched by the housing�
• Plug the unit into an outlet with appropriate electrical protection�
Quick Start Guide
1� T urn on the blender by toggling the power switch on the front of the blender�
2�Raise the sound enclosure lid�
3�Place the blender jar on the motor base, ensuring the jar is completely seated
and the jar lid is secured�
4�Close the sound enclosure lid�
5�On the touchpad, press the desired blend cycle number or pulse icon�
6�Push any blend cycle button (1 through 5) to stop a blend cycle before the
programmed time elapses�
¾" (1�9 cm)
Maximum
thickness
30
Preprogrammed Cycle Buttons
Figure 5. Counter space for Connoisseur 825
Pulse
3" (7�6 cm)
Minimum
clearance