Tabla de contenido
Publicidad
ENGLISH
Installation
Status
LED Indicator
Solid green
Power
Off
Solid green
Link/Act/Speed
Solid orange
Off
Mode Control:
You can select the switch mode.
Normal mode: All ports can communicate with each other.
Flow control mode:Flow control function close, all ports can
communicate with each other.
VLAN mode:1~14 ports can not communicate with each other, but can
communicate with 15~16 ports.
Extend mode:Speed of 1~8 ports is reduced to 10 Mbps, transmission
distance can reach 250m.
Connecting Equipment
that it is properly connected to a power source.
Step2. Plug-in the Power Adapter to the Switch.
Step3. Connect your network devices with the switch by
using Ethernet cable. (e.g. Cat-5e)
Meaning
Power is on.
Power is off.
A device is connected to the port at a speed
of 1000Mbps
A device is connected to the port at a speed
of 10/100Mbps
The port is NOT connected.
3
Publicidad
Tabla de contenido
