Publicidad
Idiomas disponibles
Idiomas disponibles
Thank you for your purchase!
Instructions made easy
Read instructions or watch
easy-to-follow video.
Scan code or visit
https://byjasco.com/
57418i
Discover innovative
power solutions at
www.byjasco.com/power
For deals, to register
your purchase and to
tell us how we're
doing, simply scan
the code or visit
byjasco.com/deals
Like our product?
Leave a review
on your favorite
retailer website
or amazon.com
Having problems?
Let us know how
we can help.
1-800-654-8483
between 7AM-8PM,
M-F, Central Time.
Battery Backup Solar Security Light
BATTERIES
Power or use 4D batteries as a back-up to your solar panel, batteries not included.
When replacing, do not mix old batteries with new batteries.
1. Remove the mounting bracket by sliding it down. (Figure 1)
2. Loosen the battery door screw with either a flat-head screwdriver or a #1 Philips- head screwdriver.
3. Unlatch each clip and remove the battery door.
4. Insert 4 D batteries (not included), noting polarity. Replace the battery door, fastening the
screw back into place — do not overtighten. (Figure 2)
SECURITY LIGHT
Mount the security light on walls or eaves. For the best performance, install at least 8ft.
above ground level. Ensure the mounting area is dry and clean of debris.
1. Hold the mounting bracket in place and mark the location for each screw.
2. Drill pilot holes using a 3/16in. drill bit.
3. Insert the included anchors.
4. Install the mounting bracket using the included screws and a #1 Phillips-head screwdriver —
do not overtighten.
5. Reattach the security light to the mounting bracket, ensuring the clips lock into place.
SOLAR PANEL
When installing, ensure that there are no objects obstructing the panel from full sunlight
exposure. A full daily charge will take up to 7 hours.
1. Mark the mounting locations of either the short or long-arm base using the screw holes as guides.
2. Before drilling, check that the marked areas are clear of obstacles such as cables and electrical lines.
3. Drill a pilot hole using a 3/32in. drill bit and secure the base with the included screws and anchors.
4. Align the solar panel with the top of the mounting arm and adjust the angle for optimum
sunlight exposure. (Figure 3) Secure it to the arm with the provided wing nut.
5. Plug the provided 15ft. USB-A cable into the solar panel and security light.
Note: If plugging USB-A cable into USB port or outlet, ensure it is a 5V, 2A power source
OPERATION
Solar panel: Press the button on the back of the solar panel to power the security light. The
security light will consume power from the solar panel before consuming battery power.
Motion sensor: The light turns on in low light conditions when motion is detected in a 25ft., 120°
range and off when motion is no longer detected.
Adjustable heads: Rotate the head of the security light to point where you need the most coverage.
SPOTLIGHT OR FLOODLIGHT
Attach or remove the included frosted lens over the head to alternate between flood
and spotlight modes.
Spotlight - When you want a brighter light
• No lens attached, the light shines in a concentrated area. (Figure 4)
• When removing the lens, gently use a flathead screwdriver to pop it out of place. (Figure 5)
Floodlight - When you want a more diffused light
• Lens attached, diffused light shines in a wider area.
• When attaching the lens, ensure the holes of the lens are on the side of the light fixture and that it
firmly snaps into place.
MADE IN CHINA
©2021 Energizer. Energizer
WARNING: Read all safety precautions and installation instructions carefully before installing or
and certain graphic designs
are trademarks of Energizer
operating this fixture.
Brands, LLC and related
- Do not expose the solar panel to fire or intense heat.
subsidiaries and are used under
- Do not immerse it in water.
license by Jasco Products
BATTERY INSTRUCTIONS:
Company, LLC.
This product contains a rechargeable lithium battery. The battery is non serviceable, please
contact Jasco Products for a replacement solar power unit.
Contact our U.S.-based
CARE AND MAINTENANCE:
Consumer Care at
-The solar panel is not allowed to dip into water or any other liquid. The water-resistant function
1-800-654-8483 between
is limited to correct installation or within a certain angle in rain.
7AM-8PM, M-F, Central Time.
-To optimize the effectiveness of your solar panel, do the following: Choose a location for your
solar panel that gets the most sunlight throughout the year. Wipe the panel every few months
2-year warranty. Visit
www.byjasco.com for warranty
to remove dust or debris that might affect the solar energy harvesting efficiency of the panel.
details.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
WARNING
CAUTION
RISK OF ELECTRIC SHOCK
• BATTERIES MAY LEAK
• DO NOT SUBMERSE.
HARMFUL LIQUIDS OR
• DO NOT USE AROUND AQUARIUMS.
IGNITABLE MATERIALS
• SOLAR PANEL IS A WET LOCATION PRODUCT
OR EXPLODE CAUSING
AND HAS NO SERVICEABLE PARTS.
INJURY OR PRODUCT
• KEEP SOLAR PANEL AT LEAST 16 FEET FROM
DAMAGE.
POOL AND SPAS.
• DO NOT MIX OLD
• AVOID DAMAGE TO SOLAR PANEL. INSPECT
AND NEW OR OTHER
THE SOLAR PANEL FOR PHYSICAL DAMAGE
BATTERY TYPES.
OR OTHER DAMAGE CAUSED BY OUTDOOR
• REPLACE ALL BATTERIES
EXPOSURE TO THE ELEMENTS.
AT THE SAME TIME.
• REPLACE THE SOLAR PANEL IF DAMAGED.
• REMOVE BATTERIES
• DO NOT INSTALL IN LOCATIONS WHERE SOLAR
IF PRODUCT IS TO
PANEL CAN BE STEPPED ON.
BE UNUSED FOR
• CHILDREN SHOULD NOT PLAY WITH SOLAR PANEL.
EXTENDED PERIOD
• ONLY USE SOLAR PANEL WITH SECURITY LIGHT.
OF TIME.
57418-1 EnSp Manual v1 7/30
Publicidad
