LG U9C Serie Manual Del Propietário página 39

N
The display
does not
appear.
I set UVnano,
but the UV icon
is not displayed
on the status
display.
(Only models
with UVnano
applied)
The
temperature/
humidity is
displayed
differently from
other products.
Symptom
Is the display brightness
set to off?
Is there no indication of
/
display?
Is
indicator?
Is outside air continuously
coming into the place
where the product is
installed?
Cause
on the status
on the status
Remedy
• To change the display brightness,
Sleep Timer button
press the
on the remote controller for more
than 2 seconds.
• Only 3 icons are displayed
according to priority.
• Reset the UVnano by pressing
the Speed down and Rotation
buttons on the control panel at the
same time for 3 seconds.
• Displayed when UV does not
operate normally. (Check if the
filter and air intake (cover) are
installed in the correct position.)
• Temperature and humidity values
may fluctuate continuously in an
environment where outside air is
introduced.
• Temperature and humidity
may vary depending on the
surrounding environment such
as doorways, windows, and
ventilation holes.
• Temperature and humidity may
appear differently depending
on air circulation in the same
room. Also, the temperature
and humidity may be different
from other products and thermo-
hygrometers.
EN
39