EN
1.2 Restrictions
PROHIBITED
d
– Modify and/or attempt to repair the
product. All repairs must be per-
formed exclusively by authorised
personnel.
– Leave the device exposed to atmos-
pheric agents.
– Place the device near to heat sourc-
es or expose it to direct sunlight.
– Position the device in proximity of
sources of electromagnetic distur-
bance.
– Use the device in environments
where the temperature drops be-
low 0°C.
– Open and/or replace the battery.
– Use solvents to clean the device.
– Incorrectly dispose of packaging
material and keep it out of children's
reach as it may represent a hazard.
Disposal must be performed in line
with applicable laws.
– Dispose of the device as domestic
waste.
1.3 Device description
ElecTo SJ is a single-jet meter with mechan-
ical movement and fully electronic timing
devices designed for measuring hot and
cold water in residential applications.
ElecTo SJ measures the flow of water using
a turbine and a magnetic drive (protected).
ElecTo SJ is equipped with an electronic me-
tering unit with a display showing the vol-
ume, flow rate and any active alarms.
ElecTo SJ is equipped with an integrated ra-
dio which uses Wireless M-Bus technology
allowing remote data transmission. Data
can be received using a special mobile read-
ing kit or via concentrators and a fixed net-
work.
The main technical features of ElecTo SJ are:
– Single electronic jet;
– Available in both cold and hot water
versions;
– Accuracy class up to R160;
– Electronic timing device for calculating
consumption, fully rotatable (360°);
– LCD display;
– Integrated wM-Bus radio operating in
the 868MHz band;
– Integrated lithium battery guarantee-
ing a minimum service life of 7, 13 (de-
fault) or 15 years.
21