Parts & Assembly; How To Operate - Nostalgia Products CLSMIXER356AQ Instrucciones Y Recetas

PARTS & ASSEMBLY
PARTS
Mixing bowl

HOW TO OPERATE

• *NOTE: There is a Left and Right Beater and Dough Hook.
They must be inserted into the Left and Right Beater Shafts respectively.
• Make sure the MIXER and all of its components are clean prior to assembly and use.
• ATTENTION: To prevent damage to the appliance, the Beaters
and Dough Hooks should NOT be used together.
SETTING UP YOUR MIXER
1. Place the Main Base on a clean and stable surface.
2. Position the Mixing Bowl onto the Rotating Plate. Hold the Rotating Plate in
place and turn the Mixing Bowl clockwise until it locks into place (photo A).
3. Hold down the Tilt Release Button and push the Motor Head
upwards. Release button to lock in place (photo B).
4. Insert the right and left Beater accordingly into the Beater Shaft. Push
the Beater until it clicks into place (photo C) NOTE: Beater pairs must
be used together and should not be mixed with Dough Hooks.
5. Press the Tilt Release Button to push the Motor Head down. Your Stand
Mixer is ready for use! (Photo D) WARNING: Do not put hands or utensils
inside the Mixing Bowl while the appliance is on and the Beaters are moving.
Make sure the machine is OFF and unplugged before proceeding.
5
Bowl Shift
Knob
Dough
Hooks
Beaters
Eject Button
Speed
Control
Tilt Release
Button
Rotating Plate