essentiel b EBC 9i Instrucciones De Uso página 10

Tare or zero reset function
This function allows you to reset the scale and measure the weight of each ingredient
separately, even if you place them in the same container on the scale.
Place an ingredient on the scale, its weight is displayed. Press the
the weight to "0" before weighing the next ingredient. If the screen shows "-----", wait until
the system stabilises. After a few seconds, "0" appears on the screen. You can repeat this
operation as many times as you wish.
When you press the button below 200 g, the
When you press the button above 200 g, the
Automatic scale switch off
• The scale will switch off automatically after 2 minutes if no
weighing takes place during this time.
Manual switch off
To save battery life, press the key to turn off the scale
right after use.
Note: if the scale shows "0", press briefly on the
if the screen shows a weight, press and hold the
for 3 seconds to turn off the scale.
18
button to resent
symbol (reset to zero) is displayed.
symbol (tare) is displayed.
button;
button
Error messages
1. If the screen shows "Lo", this means that the batteries
are running out of power. Please change them.
2. If the screen shows "Err", this means that the scale is
overloaded. Please remove the weight. The maximum
capacity of the scale is 5,000 g.
cleaning
• Wipe the scale platform with a soft sponge slightly wet with water and washing-up
liquid. Be careful not to allow water or other liquids to enter the appliance, especially
the battery compartment. Dry with a soft, clean cloth.
• Do not use abrasive detergents or scouring pads to avoid damaging the coating.
• Never immerse the appliance in water or any other liquid.
19