Manuales relacionados para King Innovation KING 521
Resumen de contenidos para King Innovation KING 521
- Página 1 #42521 KING 521 INSTRUCTION MANUAL WIRE AND VALVE LOCATING SYSTEM CAUTION Read and understand all of the instructions and safety information in this manual before operating or servicing this tool.
-
Página 2: Tabla De Contenido
Hazards which, if not avoided, COULD result in DESCRIPTION severe injury or death. King Innovation’s KING 521 Wire and Valve Locating System is a CAUTION universal troubleshooting and maintenance tool for locating the wire path, depth, wire breaks, large nicks, and solenoid valves. -
Página 3: Important Safety Information
CAUTION Electric Shock Hazard. Do not connect transmitter to any active AC circuits. Failure to observe this precaution may result in injury and King 521 Wire and Valve Locating System Includes: can damage the instrument. 1. Headset 6. Black Lead CAUTION 2. -
Página 4: Setup
INSTRUCTION MANUAL KING 521 SETUP OPERATION Locating Wire Path NOTE: The transmitter produces high voltage. Turn the transmitter With the probe pointed toward the ground, walk completely around off before handling the output leads. Disconnect all wires when the transmitter location. An absence of tone or null will be detected fault locating. - Página 5 INSTRUCTION MANUAL KING 521 • The end of a cut or broken wire can be located by following Determining Depth of Wire the path until the null disappears and gives way to a hot spot. To determine the depth of the wire, first mark the ground directly Beyond the hot spot, no null can be detected.
-
Página 6: Specifications
INSTRUCTION MANUAL KING 521 Step 2 Specifications 2. If more than one hot spot is found, mark them and return to the Transmitter Frequency: 1748 Hz transmitter and turn it off. Lift the black lead from the ground Transmitter Power: 750 Vpp, 285 Vrms stake and connect it to the common wire. - Página 7 ©2020 King Innovation O'Fallon, MO 63366 www.kinginnovation.com MADE IN CHINA 800.624.4320 REV A 11/20...