miogo MTB1 Manual De Uso página 14

Use
Do not put a spatula or any other utensil into the jar during operation. Only put
•
utensils into the container when the appliance is stopped.
Do not put raw meat or fish into the appliance. Cook them before adding them
•
to the jar.
Never place the following in the blender: bones, frozen food (except ice cubes)
•
and hard food.
Do not run the appliance for more than 3 minutes to avoid overheating it. Wait
•
for at least 30 minutes before using the appliance again.
Do not use the appliance when it is empty (no food).
•
Note: if the lid is not properly fitted, the appliance will not work.
6. Put the blender jar back on the motor unit and turn it slightly. The lugs on the bowl
must be correctly inserted into the lugs on the motor unit.
7. Connect the power cord to an outlet that complies with the appliance's specifications.
14
1. Place the appliance on a flat and stable surface, making sure
that the control knob is in the OFF position.
2. Unlock the blender jar from the motor unit. Remove the lid and
the measuring cap.
3. Pour the prepared ingredients (peeled and cut into pieces) into
the blender jar and add water or juice if necessary to facilitate
mixing, taking care not to exceed the maximum level: 1.75L.
Warning:
Never pour hot or boiling water into the appliance!
•
Never run the appliance when it is empty!
•
4. Put the lid back in place, and make sure that it is properly
locked using the lock on the handle.
Plug the filling hole in the lid with the measuring cap. The
5.
measuring cap has 2 functions: to measure and prevent
splashing.