Cleaning And Maintenance - miogo MTB1 Manual De Uso

Cleaning and maintenance

WARNING!
Before cleaning your blender, make sure that the "ON/OFF" knob is in the "OFF"
•
position and that the appliance is unplugged from the power point.
Never immerse the motor unit, power cord or plug in water or any other liquid.
•
There is a potential risk of injury if used improperly.
•
The blades are sharp. It is essential that you take special precautions when handling
•
them to avoid injury.
Never use scouring pads or abrasive detergents for cleaning.
•
GENERAL CLEANING RECOMMENDATIONS
Immediately rinse all the parts after use for easy cleaning.
•
The removable parts (lid, measuring cap, blender jar, blade block) can be hand washed
•
with water and washing-up liquid or placed in the dishwasher.
Be sure to clean the seal of the lid and the seal of the blade block thoroughly. When
•
they are clean and dry, put them back correctly on the appliance.
JAR AND BLADE SELF-CLEANING FUNCTION
Your appliance has a self-cleaning program that simplifies the process of cleaning the
blades and jar.
1. After using your appliance and finishing a recipe, place the blender jar on the motor
unit.
2. Pour 400 to 500 ml of warm water with a little non-abrasive cleaning product (e.g.
washing-up liquid).
Set the control knob to the ON position and press the "CLEANING" button. The
3.
corresponding indicator light comes on and the appliance starts up. The cleaning
cycle operates automatically.
4. Once the cleaning is finished, the appliance stops automatically and the 3 indicator
lights start to flash.
5. Unplug the appliance, remove the mixing bowl from the motor unit and rinse it with
clear water.
6. Turn the mixing bowl over and unscrew the blade unit (turn from position
position
7. You can now clean the blade assembly and bowl contours.
8. Dry the parts thoroughly with a soft cloth.
9. Screw the blade unit back on, making sure you tighten it to avoid leaks the next
time you use it.
18
).
to