Filling The Water Tank; Maintenance And Storage - Argo POLIFEMO ZEUS Instrucciones De Uso

THE TANK MUST BE FILLED WITH DEMINERALIZED WATER FOR THE APPLIANCE TO
OPERATE IN COOLER/HUMIDIFIER MODE.
Tank lock
Before turning on the appliance, remove the two lateral tank locks by turning them, and extract the tank located in the
back of the appliance. Add demineralized water directly to the water tank. Fill the tank up to the maximum limit indicated,
it will be possible to view the water level through a transparent window, located on the front panel of the unit. Once the
tank has been filled, put it back in its place and reposition the tank locks.
If you want to keep the temperature of the water in the tank below the ambient temperature for a long time, in order to
favor cooling in the hottest season, add one of two tablets of synthetic ice supplied to the water in the tank, after having
left it in the freezer for the time necessary for its complete consolidation. Ice absorbs heat from water.
Continuous use of ice is recommended to optimize the cooling capacity.
It is possible that the first time you use it, you will notice a perfume or the water takes on a particular color: there are no
health risks.
WARNING: ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE
PROCEDURES. IMPORTANT: DO NOT SUBMERGE THE PRODUCT IN WATER
Cleaning the outside surface of the appliance
Use a soft cloth to remove any dust from the product.
If this is not enough, use a soft cloth dampened with water and a mild detergent at a temperature not exceeding 50°C. Let
the appliance dry completely before using it.
Do not use corrosive detergents or solvents such as petrol. Do not wash the appliance with water.
chemical substances or other items that may damage the surface to clean it.
Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
V 01/21

FILLING THE WATER TANK

MAINTENANCE AND STORAGE

Maximum water level in the tank
Minimum water level in the tank
Do not use oils,
19