Mophie Powerstation XL Manual Del Usuario página 6

All manuals and user guides at all-guides.com
Recharging your powerstation XL universal battery
Use the included micro USB cable to connect the
powerstation XL universal battery to your computer or
to a USB wall adapter, such as the one that came with
your device.
The powerstation XL universal battery will begin
charging immediately and the status LEDs located on
its side will blink; after 30 seconds the lights will turn
off. Before you disconnect the micro USB cable, press
the status button to make sure the powerstation XL
battery is fully charged (see below).
Checking the charge status
Press the status button on the powerstation XL
universal battery's side panel and the status LEDs will
indicate its charge level. Four LEDs means that it's
fully charged, while one LED means that it's almost
empty. Know before you go.
6