INVENTOR P3F-WiFi25L Manual Del Propietário página 3

20:14 20:14 61% 61%
Home Home
Nong Jun Nong Jun
User name User name
+ +
Add Device Add Device
[1.3]
1.3 Press "+ Add Device"
1.4 Scan QR Code, which is attached with unit
TIP: User may take picture of the QR code and
save it on their phone
20:14 20:14 61% 61%
Network Network OK OK
My Home My Home
Network 1 Network 1
Network 2 Network 2
Password Password
[1.5]
1.5 Select Wireless network, for example My
Home (picture is for reference use only)enter
your Wireless router password and click OK.
1.6 Upon successful configuration, the device
appears on the list.
2. Network configuration with an IOS device
2.1 Make sure your mobile device is connected
to the wireless network selected. Also, other
wireless networks should be ignored in case
it influences your configuration.
2.2 Press the Power button to turn unit ON then
press and hold Filter button to activate the
AP mode.
20:14 20:14 61% 61%
QR Code QR Code Pictures Pictures
Align the QR code within the frame to scan Align the QR code within the frame to scan
The first press of restart The first press of restart
[1.4]
Home Home
Username Username
+ +
Add Device Add Device
POWER WIFI POWER WIFI Online Online
[1.6]
Home
User name
+
Add Device
Align the QR code within the frame to scan
The first press of restart
2.3
2.3 Press "+ Add Device"
2.4 Scan QR Code attached to unit
2.5 Read the instructions above and press the
"Home" button to return to the Phone Desktop
TIP: User may take picture of the QR code and
save it on their phone
No SIM
No SIM 20:14 61%
Settings Settings
CHOOSE A NET WORK.....
Airplane Mode
net_a1 _0010
WLAN Smart
Network 1
Bluetooth Off
Network 2
Cellular Off
Network 3
VPN
Network 4
Notifications
Network 5
Control Center
Network 6
Do Not Disturb
Network 7
Network 8
General
Network 9
[2.6]
2.6 Click settings to enter the setting page, select
WLAN.
2.7 Choose net_a1_XXXX.
2.8 Type default password: 12345678 and click
"Join".
Network 1
Network 2
[2.9]
2.9 Return to the APP and click Next.
2.10 Select Wireless network, for example My
Home (picture is for reference use only)
enter your Wireless router password and
click OK.
2.11 Upon correct configuration, the device will
show on the list. If not, please check the
user's manual for further information.
20:14 61% 20:14
QR Code Pictures Connecting Device
2.4
20:14 61% No SIM 20:14
Joining "net_ac_0010"
WLAN
Cancel Enter Password
Password
[2.7] [2.8]
Home
User
POWER WIFI
+
Add Device
[2.10] [2.11]
61%
Next
2.5
61%
Join