Audio Settings - Gioteck SC3 PRO Manual Del Usuario

AUDIO SETTINGS

• The mute button has no function when a device is not connected to the 3.5mm Audio Jack.
• When an audio device is connected, pressing the Mute button once will mute the connected microphone and the Mute LED will turn red.
• Press the Mute button again to disable the Mute function. The Mute LED will turn off.
• If the Controller is in mute mode when a device is disconnected, mute mode will be disabled, and the Mute LED will be off.
• Press - and + buttons to adjust the device volume.
NOTE: The 3.5mm Audio Jack is supported in wired mode only. The controller must be connected to the Switch via the USB cable
for audio features to work.
NOTE: Headphones must be connected to the 3.5mm audio jack to adjust the volume.
THUMBSTICK REPLACEMENT
1. Remove by pulling each thumbstick up. Do not twist.
2. Replace by lowering the thumbstick back until a magnetic "click" is heard.
NOTE: If you do not feel a magnetic click when replacing
a thumbstick, check for dust/debris that may have
collected and clear if necessary.
06