Counterweight cover
Lower support tube
Setting up the stand
Place the cover on the counterweight and, using the screw provided, secure
the cover to the counterweight.
Attach the lower support tube to the counterweight until it snaps into place
and attach the upper support tube to the lower support tube until they click
into place.
USE
- Remove the appliance from its packaging.
- Place the mosquito bait in the compartment provided for this purpose.
- Connect the unit to the mains.
- If you wish to use the appliance only at night, slide the light sensor
switch outwards, leaving the sensor uncovered.
- If you wish to use the device during the day, slide the light sensor
switch towards the centre, covering the sensor.
- The appliance will start working and the UV lamp will switch on.
27/28
Counterweight
Screw
Upper support tube