Symbols - Ryobi RY40702 Manual Del Operador

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper in-
terpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read Operator's
Manual
Eye Protection
Wet Conditions Alert
Keep Bystanders
Away
Cutting Hazard
Cutting Hazard
Electricity
Recycle Symbol
Direct Current
V Volts

SYMBOLS

MEANING
Indicates a hazardous situation, which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation, that, if not avoided, may result in minor or moderate injury.
(Without Safety Alert Symbol) Indicates information considered important, but not related
to a potential injury (e.g. messages relating to property damage).
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Always wear eye protection with side shields marked to comply with
ANSI Z87.1.
Do not expose battery, battery compartment, or electronic compo-
nents to rain, water, or liquids. Do not expose to rain or use in damp
locations.
Keep all bystanders at least 50 ft. away.
Keep feet and hands away from rotating tines. Rotating tines will
cause injury.
Keep feet and hands away from rotating tines. Rotating tines will
cause injury.
This product is considered to have hazardous voltage.
This product uses lithium-ion (Li-ion) batteries. Local, state, or federal
laws may prohibit disposal of batteries in ordinary trash. Consult your
local waste authority for information regarding available recycling and/
or disposal options.
Type or a characteristic of current
Voltage
5 — English
DESIGNATION/EXPLANATION