Use And Care; Arc Welding - Husky ST80 Guía De Uso Y Cuidado

Safety Information (continued)
□
Do not wear gloves, hair preparations, shoes and other
clothing that contains oil, grease, or other ammable
substances. Wear re-resistant protective clothing to protect
upper and lower body against re and heat. Protective
clothing includes but is not limited to leather gloves, heavy
long sleeve and cuf ess shirts, heavy and cuf ess pants,
high-topped shoes and helmet.

USE AND CARE

□
Ensure you choose the right welder model and welding
mode recommended for your application. Use the welder
and accessories in compliance with these instructions.
Operating a welder under improper conditions could cause
unpredictable safety issues.
□
Store idle welders out of reach of children. Do not allow
people who are unfamiliar with the welder and operational

ARC WELDING

CAUTION: High frequency and electromagnetic energy
generated from the welding process could cause damage to
your electronical devices. To reduce the risks, please read,
understand and follow the safety instructions.
□
Follow manual to install and ground machine. Be sure
nearby equipment is compatible with electromagnetic
energy.
□
Electronic products such as computer, computer-driven
equipment and communication equipment can be interfered
or even harmed by electromagnetic energy. Users with
pacemakers should consult with their physician before using
a welder because a pacemaker can be damaged by
electromagnetic energy if exposed to it.
□
Follow requirements in OSHA and NFPA for hot work and
have an extinguisher nearby.
□
When nished welding, do not leave without a check for
evidence of potential re. Overlooked smoke or ame have
risks to cause re hazard. Check and make sure the welding
areas are free of sparks, slags, and ames before leaving
the welding area.
instructions to operate the welder. Ignorance of any safety
instructions or operational guidance will result in potential
safety risk.
□
Replace damaged parts immediately before use. Many
accidents are caused by poorly maintained welders.
□
Have your welder serviced by a quali ed service person if
you encounter problems.
□
TIG welder and TIG welding process can generate high
frequency. High frequency can interfere with radio
navigation, safety services, computers and communication
equipment.
□
It is the user's responsibility to have a quali ed electrician
promptly correct any interference problem resulting from
installation or operation of the welder. The welder should be
regularly inspected and maintained. If necessary, shield the
work area or move the welding machine.
□
The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions and
situations. It must be understood by the users that common
sense and caution are factors which cannot be built into this
product, but must be provided by the operator.
4