Usb Playback - Crosley CR3112A Manual De Instrucciones

English
Aux Input Connection
You can connect an audio device to this unit and play your music through its
speakers. To do this, turn on the unit, press the Mode Button to Aux-In Mode
(Red), connect a 3.5 mm auxiliary cable between your audio device to the Aux In
Jack of this unit and start playing the music.

USB Playback

1. Press the Mode Button repeatedly to select the USB (purple).
2. Insert a USB device into the USB port.
3. To skip to the next or previous track, press the Forward Skip or Backward
Skip button correspondingly.
4. During the playback, press the Play/Pause button to pause. Press it again to
resume playback.
Note: This unit can play 5 formats: MP3, WMA, WAV, FLAC and APE.
Device Charging
Charge devices by plugging one end of the charging cord into the Montero
Speaker's charging jack and the other end into your device.
Troubleshooting
There is no power
• The battery needs to be charged.
There is no sound
• Make sure the volume is turned up.
• Make sure the volume on your third party device is turned up.
6