Installation - KENMORE ELITE 253 Serie Guía Para Su Uso Y Cuidado

Ocultar thumbs Ver también para 253 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

This Use & Care Manual provides specific operating
instructions for your model. Use the refrigerator only as
instructed in this Use & Care Manual. Before starting the
refrigerator, follow these important first steps.
LOCATION
Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.
If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources.
The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
Consider water supply availability for models equipped
with an automatic ice maker.

INSTALLATION

CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
DO NOT install the refrigerator where the temperature will
drop below 55°F (13°C) or rise above 110°F (43°C). The
compressor will not be able to maintain proper
temperatures inside the refrigerator.
DO NOT block the toe grille on the lower front of your
refrigerator. Sufficient air circulation is essential for the
proper operation of your refrigerator.
IMPORTANT
If you install your refrigerator in a garage or other unheated
area, you may experience freezer temperature problems
during the winter months when temperatures dip below
55° F.
Upgrading your refrigerator with a Garage Kit will lower the
minimum operating temperature of your unit to 34° F. This kit
can be ordered through Sears stores or Sears Parts & Repair
at an additional cost.
Installation Clearances
Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top
3/8"
Back
1"
N O T E
N O T E
N O T E
N O T E
N O T E
If you see black coils/tubing on the back of your refrigerator
(air-cooled condenser) leave 3" clearance at top of
refrigerator.
All manuals and user guides at all-guides.com
INSTALLATION
DOOR OPENING
Your refrigerator should be positioned to allow easy access to
a counter when removing food. To make this possible, the
direction in which the doors open can be reversed. See Door
Removal & Reversal Instructions .
LEVELING
All four corners of your refrigerator must rest firmly on a solid
floor. Your refrigerator is equipped with adjustable front rollers
or front leveling screws to help level your unit.
To Level Your Refrigerator:
1.
2.
5
N O T E
N O T E
N O T E
N O T E
N O T E
If your refrigerator is placed with the door hinge side against
a wall, you may have to allow additional space so the door
can be opened wider.
Remove toe grille.
Use flat-blade screwdriver
or 3/8" socket wrench to
adjust front rollers. Use
adjustable wrench to
adjust leveling screws.
N O T E
N O T E
N O T E
N O T E
N O T E
Raise the front of the refrigerator enough so the doors close
freely when opened halfway. The refrigerator should slope ¼"
to ½" down from front to back. Then level the refrigerator from
side to side by adjusting the front rollers.
Adjustable Front Roller
(some models)
Raise
Stationary Front Roller
with Leveling Screw
(some models)

Publicidad

Tabla de contenido
loading

Tabla de contenido