Dehumidifying Operation; Swing Operation - INVENTOR M3GHP290-12 Manual Del Usuario

3
1
SHORT CUT
I SENSE
1
SHORT CUT
I SENSE

Dehumidifying operation

Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit illuminates.
1. Press the MODE button to select DRY mode.
2. Press the TEMP button to set the desired
temperature. The temperature can be set
within a range of
increments.
2 3. Press the ON/OFF button to start the air
conditioner.
NOTE
In the Dehumidifying mode, you can not switch
the fan speed. It has already been automatically
controlled.

Swing operation

Use the SWING button to adjust the Up/Down
airflow direction.
1. When press the button once and quickly, the
air flow direction setting feature of the louver is
activated. The moving angle of the louver is
6 for each press. Keep pressing the button to o
move the louver to the desired position.
2. If keep pressing the SWING button without
releasing for 2 more seconds, the auto swing
feature of the louver is activated. The horizontal
louver would swing up/down automatically.
Press it again to stop.
NOTE: When the louver swing or move to a
position which would affect the cooling
and heating effect of the air conditioner,
it would automatically change the swing/
moving direction.
8
11
17 C(62 F)~ 30 C in 1 C(2 F)