Caliber HPG 540BT Manual página 11

Playing from USB-stick
• Turn the speaker ON.
• Insert a USB stick into the slot (11), the stored music will be played automatically.
• While playing, press [-] or [=] (3/4) to select the previous or next song.
Note: Under Bluetooth or AUX-in mode, if a USB is inserted it will automatically start playing.
To return to the previous mode, use the [MODE] button.
AUX-IN:
You can connect an external device e.g. MP3 player to the AUX-in (12) of this device using a
jack-to-jack (cable included).
• When an external device is connected, The device will switch to Aux-in mode automatically.
• Start playing music on your external device.
Note: The playback control buttons on this device will not work in this mode.
TWS
1. Turn on two identical speakers you want to pair, please note they must have the same BT paring
name. Only need to set up one of the two devices.
2. Press TWS " " button (8), speaker will make a tone to start pairing, and make a tone again once
successfully paired.
3. Make Bluetooth connection with your mobile phone to play music by the two paired Speakers to
create more powerful surround sound effect.
4. When you want to exit the TWS mode, press TWS "
Note: 1. Users need to make TWS connection first, then make Bluetooth connection with the mobile
phone.
2. Under TWS mode and Bluetooth connected, when user long press the TWS button, both
the TWS connection and Bluetooth connection will be disconnected.
Remark: Under the TWS mode, if you connected your mobile phone to the device (you set at
beginning) via the provided audio cable, it will start to play AUX via TWS function, under this status,
you can not switch to Bluetooth mode by pressing the Mode button.
A A
" button again to exit the TWS function.
TWS
Combine two HPG540BT's for a
louder and wider stereo sound
B B