Link DURALIFT II Instrucciones De Instalación página 7

10.5 Fasten frame brackets to the frame
rail with SAE 5/8'' UNC GRADE 8 HEX
FLANGE BOLTS and 5/8'' GRADE G
PREVAILING TORQUE HEX FLANGE
NUTS (not supplied, available with op-
tional installation kit 800A0014).
TORQUE to 160-180 FT-LBS.
10.6 Assemble the suspension to the
front frame brackets using the provided
mounting hardware (See Fig. 4 for fas-
tener detail)
NOTE: Center the suspension on the
truck with the frame width adjustment
slots.
TORQUE to 90-120 FT-LBS.
10.7 Assemble the air springs to rear
frame brackets using the 1/2'' and 3/4''
mounting hardware (See Fig. 4 for
fastener detail).
TORQUE the 1/2" nut to 20-30 FT-LBS.
TORQUE the 3/4" nut to 45-50 FT-LBS.
1.43
5.25
5.50
2.50
22.11" IN LIFTED POSITION
22.56" AT MIN RIDE HEIGHT
21.96" AT MAX RIDE HEIGHT
20.31" IN REBOUND POSITION
1/2" X 1-1/2"
UNC
FLANGE
BOLT
(6 per side)
FASTENER
MOUNT
STRAP
(2 per side)
25.87
5.25
2.50
FIG. 3
1.25
2.50
FIG. 4
1/2" UNC TOP
LOCK FLANGE
NUT
3/4" UNF
HEX JAM
NUT