Auxiliary Handle - 9&1 70051 Instrucciones De Uso

This tool has a speed control dial (6) that delivers higher speed by turning to the "+" direction, and delivers lower speed
by turning to "-"direction.
Forward/reverse lever (Fig. 5)
The forward/reverse lever (7) is to determine the rotation direction of the chuck.
To select forward rotation, release the ON/OFF switch (5) and push the forward/reverse lever to right (R) side of the tool.
To select reverse rotation, push the lever to left (L) side of the tool.
Clockwise rotation
NOTE: When changing the position of the lever, be sure the ON/OFF switch is released and the motor is stationary.
Drill and impact mode selector (Fig. 6)
The drill and impact mode selector is on the top of this impact drill.
Push the button of drill /impact mode selector (3) to the " " to select the drill/impact mode of action.
Push the button of drill/impact mode selector to the drill position " " to select the drill mode of action.
The drill and impact mode selector is on the top of this impact drill.

Auxiliary handle

The auxiliary handle subassembly (8) will provide additional control, support and guidance for the drill. The auxiliary
handle subassembly is adjustable to any position around the 360°handle collar mount.
Installing the auxiliary handle subassembly (Fig. 7)
Fig. 4
Fig. 5
Anticlockwise rotation
Drill position
Drill/impact position
Fig. 6