Important Safety Information - hortiONE 420 Manual De Uso

Usage Manual
Introduction
Thank you for purchasing a hortiONE 420 / 600 LED grow light. This manual explains how to install, run and maintain
your grow light. Mounting and installing of the LED fixture may be executed by certified service personnel only. Please
read and understand this manual completely before using the product. Only use the product as described in this
manual.

Important safety information

o Please read this manual entirely before starting the installation or operation of any lighting solution
o Installation must be carried out by qualified persons, and according to the electrical safety rules & regulations
applicable in your country!
o hortiONE 420 & 600 are high-performance light fixtures. Do not touch during operation.
o Connect the system only to the power sources of the right voltage using the correct AC plug type. Protect power
cables from being pinched, walked on, or otherwise damaged.
o Do not touch the diodes with your hands, even when powered off
o All electrical work must be carried out by qualified persons.
o Do not stare directly at the light source.
o Dispose of all waste in accordance with local regulations.
Delivery Content (LED-PANEL)
1. 1x hortiONE XXX LED Board including 2m DC Cable.
2. LED-Driver
3. 2x mounting brackets
4. Handbook
hortiONE 420
Distance between lamp and canopy
The distance is depending on your environment and the cultivated plant. A minimum distance of 15cm should be
kept in any case!
Surrounding objects
No surrounding objects should touch the lamp or its components. Keep a minimum distance of 5cm to all
surrounding objects, including another lamp.
Scope of application
hortiONE LED lamps are designed for horticultural applications only. hortiONE 420 & 600 is only suitable for indoor
environments. The Light is suitable for all land-plants (no Algae) and all growing phases. Vegetative and generative
hortiONE 600