Philips HP4897 Manual De Instrucciones página 11

troubleshooting
If problems arise with your hairdryer and you cannot solve them with the
information below, please contact the nearest Philips service centre or
the Philips Customer Care Centre in your country.
Problem Cause
The Perhaps the socket
appliance to which the
does not appliance has been
work at all. connected is not
live.
The appliance may
have overheated
and switched itself
off.
The appliance may
not be suitable for
the voltage to which
it has been
connected.
The mains cord of
the appliance may
be damaged.
All manuals and user guides at all-guides.com
EnglisH
Solution
Make sure the socket is live.
Unplug the appliance and let it
cool down for a few minutes.
Before you switch on the
appliance again, check the grilles
to make sure they are not
blocked by fluff, hair etc.
Make sure that the voltage
indicated on the type plate of the
appliance corresponds to the
local mains voltage.
If the mains cord is damaged, you
must have it replaced by Philips, a
service centre authorised by
Philips or similarly qualified
persons in order to avoid a
hazard.
11