Publicidad
Idiomas disponibles
Idiomas disponibles
How to use the tools
•
The angled nozzle tool can be used
to get into awkward corners that are
normally difficult to clean.
•
Use the rotating Turbo brush tool
to scrub and loosen stubborn
dirt from hard surfaces.
•
Use the window/tile cleaner to clean
grime from tiles and windows.
•
To use these tools, first fit the straight
adaptor. Depress the button on top of
the handle and push the straight
adaptor on.
•
Now you can push any of these three
tools onto the tip of the jet-nozzle.
Please note that these attachments
slide onto the straight adaptor (do not
twist).
•
Attach the floor brush to the extension
wands, which snap together. Then
attach the extension wand to the
steam gun. Do ensure the extension
wands are firmly connected.
•
Before cleaning always remove dust
from the surface you wish to clean.
•
To release the extension wands
depress the button on the hose
connection.
Cleaning with cleaning cloth.
•
While the machine is switched off
attach the cleaning cloth to the floor
brush via the spring-loaded clips,
Make sure the edges of the cleaning
cloth are secure.
•
DO NOT attempt to do this while the
machine is still hot.
•
Never remove the cleaning cloth while
the safety trigger is released or the
machine is warm to the touch.
WARNING - Risk of injury!
Fitting the Accessories
•
The accessories may be fitted to the
steam gun (5) using adaptor (7).
•
When fitting the squeegee, adaptor (7)
is required.
•
When using the turbo brush or
high-pressure nozzle, adaptor (7) is
required.
6
7
6
2
6
3
4
1
5
Publicidad
