Cleaning And Maintenance - Ewbank UV400 Instrucciones De Cuidado Y Uso

Cleaning your mattress with the UV400
The age of your mattress determines how oNen you need to use your UV400. The
cleaning routine below is recommended to produce the best results.
·
New mattress – use the UV400 once a month
·
Used mattress – use the UV400 daily for the first week and then once a
If cleaning a double bed only attempt to clean one side at a time. Position the UV400 flat on
the mattress, switch the UV400 on and move the unit following either pattern A or B to
cover and clean the whole mattress.
Keep the UV400 flat on the surface and ensure you move the UV400 smoothly and steadily
as you would with a household vacuum (figure A or B).
Cleaning and Maintenance of the UV400
Regularly clean the HEPA filter, because the collection of dust mites into the filter may not
always kill them, and they may continue to breed. In order to avoid secondary pollution,
please clean the HEPA filter and re-use aNer drying, or replace a new HEPA filter.
1. Turn off the machine and unplug the power cable;
2. As shown in Figure below, remove the dust container
3. Hold the dust container and pull out the filter assembly as indicated by the arrow
or
8