EN
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fire and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non observance
of the instructions in this manual.
Maximum permissible load 150 kg. Do
not exceed the maximum permissible
load.
Use the mitre saw stand on flat and
level ground.
Support long workpieces, for example
with another workbench.
Do not stand on top or use as ladder.
SPECIFIC SAFETY INSTRUCTIONS FOR SAW
STANDS
• Pull the plug from the mains receptacle and/or
remove the battery from the power tool before
making adjustments on the tool or changing tool
accessories. Unintentional switching on of the
power tool is the cause of many accidents.
• Assemble the saw stand in the proper manner
before mounting the power tool. Proper assembly
is important to prevent the risk of a collapse of
the saw stand.
• Attach the power tool securely to the saw stand
before using it. Slipping off of the power tool on
the saw stand can lead to loss of control.
• Place the saw stand on a firm, level and horizontal
surface. If the saw stand can slip off or wobbles,
the power tool or the workpiece cannot be uni-
6
formly and securely guided.
• Do not overload the saw stand and do not use
it as a ladder or scaffolding. Overloading or
standing on the saw stand can lead to the upward
shifting of the centre of gravity of the stand and
its tipping over.
• When working or transporting, take care that
all bolts and connecting elements are firmly
tightened. The attachment sets for the power tool
must always be firmly locked. Loose connections
can lead to instability and inexact sawing.
• Mount and dismount the power tool only when it
is in the transport position (for instructions on the
transport position, also see the operating instruc-
tions of the respective power tool). Otherwise, the
power tool can have such an unfavourable centre
of gravity that it cannot be held securely.
• When the power tool is mounted to the attach-
ment set, operate it exclusively on the saw stand.
Without the saw stand, the attachment set with
the power tool does not stand securely and can
tip over.
• Ensure that long and heavy workpieces do not
affect the equilibrium of the saw stand. Long
and/or heavy workpieces must be supported at
the free end.
• Keep your fingers clear of the hinge points while
pushing the saw stand together or pulling it apart.
Danger of fingers being crushed or contused.
• Observe valid national and international standards.
2. PRODUCT INFORMATION
Intended use
This product is designed and intended for domestic
use, for general purpose tool stand use in home
and garden environments and for hobby purposes.
This workbench is not developed for professional
use. The Workbench must be handled, cared for
and maintained in accordance with these instruc-
tions. Any other use is deemed improper and may
result in damage to property or personal injury.
The universal tool stand is designed for use with
tabletop devices such as mitre saws, scroll saws,
table saws, etc. Electric power tools without suita-
ble mounting holes are not permitted to be fitted to
the universal tool stand and shall not be operat-
ed in conjunction with the universal tool stand.
Electric power tools must be firmly bolted to the
universal tool stand before starting them up.
WWW.VONROC.COM