Lionelo JulieONE Manual De Usuario página 8

Only replacement parts supplied or recommended by the
15.
manufacturer shall be used.
Do not use the product on stairs.
16.
How to assemble the pram
1.
Unlock the locking hook. Grab the handle and lift it to unfold the trolley (1).
Warning! Be careful when unfolding the truck. Risk of being trapped!
2.
Straighten the frame until you can hear a distinctive click (2).
3.
Lift with both hands and unfold the pram until frames lock. Check if the pram
has been unfolded properly and cannot fold on its own (3).
4.
Unfold the canopy (4).
5.
Slide the wheels into the frame of the cart.
Rear wheels assembly and disassembly
•
To install the rear wheels, slide the pin into place (25).
•
To remove the rear wheels, press the red button located under the wheel
and then slide them out (26).
Front wheels disassembly
Press the button on the front wheels and slide them out of the frame.
Handle (5) (6)
•
To disassemble the child's handle, press buttons on its sides and take it out.
•
To fix the handle, insert it until it locks.
•
You can also take the handle out on one side and tilt as this makes placing
and taking the child out easier.
Bottle holder (7)
•
A bottle holder is fixed on a hook. To dismantle it, rotate the handle upside
down and press it until it unlocks.
•
To fix the bottle holder, put it on the hook until it locks.
Canopy (8)
To fold the canopy, pull it gently until it locks.
EN ‑ 8 ‑