AquaMedic EVO 1 Manual De Instrucciones página 11

3. Add a pump to a network
There are two types of configuration modes:
1. Connection without Router:
If no router is available, the login is omitted when opening the app. Instead, select "Access Point (direct)" at
the top right.
Fig. 2a: Direct connection without WiFi via access point (direct).
Press the WiFi button on the dosing pump for about 10 seconds and the flashing WiFi icon and the addition "AP"
in the lower right area of the WiFi icon indicate entry into the distribution mode of the AP network.
Fig. 2b: The two lower LEDs must flash simultaneously if you want to connect directly to the pump.
The name of the device now appears in the WLAN settings of the smartphone. The smartphone must be
connected to the pump there.
Fig. 2c: In the WLAN settings of the smartphone, select the desired pump. The password is: 123456789.
11