AquaMedic EVO 1 Manual De Instrucciones página 12

Fig. 2d: The connection is established by first tapping on the reefdoser symbol and then ticking the check mark
in the circle in front of "Device is in access point mode". "NEXT" takes you to the next screen.
Fig. 2e: Tapping takes you to the next screen. Once you have reached the pump menu, you can create a
program there (see 4. Pump control).
2. Connection with WLAN:
Smart configuration mode. After login, select the "Smart Configuration Mode" to connect your device via WLAN
router. The AP mode displayed there is currently not available.
Fig. 3: By tapping on the circle above the lower arrow, the desired mode is confirmed. By tapping "AP Network"
or "Smart Network" next to the top arrow (the arrow is not present in the APP), you can switch between the two
modes. (Here the "Smart Configuration Mode" must be selected, that means "AP Network" must be displayed).
The AP Network is not available!!!
12