Husqvarna Soff-Cut 4000 Manual De Usuario página 15

6. Use the cutting depth pointer to make sure you have
the correct cutting depth.
Note
There are 2 cutting depth marks for different
dimension of blades.
7. Push the forward speed lever in the direction of
"FAST" to move the product forward. Start slow and
increase the speed until you get the correct cutting
speed.
Note
Do not push the product.
794 - 001 - 19.04.2022
a) Adjust the speed to the hardness of the concrete
to cut straight. Push or pull the forward speed
lever to adapt the speed.
b) If the speed is too fast, the product turns right.
Decrease the speed to cut straight.
15