Electrical Safety - Singercon SIN-ALD-1000 Manual De Instrucciones

2.1.

Electrical safety

a) The plug of this device must fit into the outlet. Do not modify the plug in any
way. Original plugs and matching outlets reduce the risk of electric shock.
b) Avoid touching grounded parts, such as pipes, heaters, ovens, and
refrigerators. There is an increased risk of electric shock if your body is
grounded and touches the device exposed to direct rain, wet pavement, and
operation in a humid environment. If water enters the device, there is an
increased risk of damage to the device and electric shock.
c) Do not touch the device with wet or damp hands.
d) Do not use the cord in an unintended manner. Never use it to carry the device
or to pull the plug out of the socket. Keep the cord away from heat sources,
oil, sharp edges or moving parts. Damaged or tangled cords increase the risk
of electric shock.
e) If you cannot avoid using the unit in a wet environment, use a residual current
device (RCD).
Using an RCD reduces the risk of electric shock.
f) Do not use the device if the power cord is damaged or shows signs of wear. A
damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
g) To avoid electric shock, do not immerse the cable, plug, or device itself in water
or other liquid. Do not use the device on wet surfaces.
h) CAUTION - THREAT TO LIFE! When cleaning or using the device, never immerse
it in water or other liquids.
2.2. Safety of use
a) Do not use the device in an explosive area, for example in the presence of
flammable liquids, gases or dust.
b) If you find any damage or irregularities in the operation of the device,
immediately turn it off and report it to an authorized person.
c) If you have any doubts as to whether the device is working properly or if it is
damaged, contact the manufacturer's service department.
d) Only the manufacturer's service department can repair the device. Do not
carry out repairs yourself!
e) In case of open flames or fire, use only dry powder or snow (CO2) fire
extinguishers to extinguish the live equipment.