Singercon SIN-ALD-1000 Manual De Instrucciones página 22

2. Mark the location of the metal brackets on the unit chassis. Pre-drilling pilot
holes of ≤1mm diameter to facilitate the bracket installation is
recommended.
Screw the metal bracket to the top of the unit casing using self-tapping
screws.
Do not use excessive force to avoid damage to the unit and the screw hole.
3. Mount the display in the desired location on the wall using the studs and
screws.
Verify the correctness and durability of the mounting to avoid dropping and
damaging the device.
Additionally securing the display to the wall using a neutral organic silicone
adhesive to provide additional fixation is recommended.