Steinberg Systems SBS-EH-600/18 Manual De Instrucciones página 31

Do not overestimate your capabilities. Maintain body balance and
g)
equilibrium at all times during operation. This allows for better control
of the machine in unexpected situations.
Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves
h)
away from moving parts. Loose clothing, jewelry, or long hair can be
caught in moving parts.
Before switching the unit on, remove any regulating tools or keys. Any
i)
tools or keys left in the rotating part of the unit may cause injury.
The unit is not a toy. Children should be watched to ensure that they
j)
do not play with the unit.
2.4. Safe use of the unit
Do not overload the unit. Use tools that are suitable for the application.
a)
A correctly selected unit will do a better and safer job for which it was
designed.
Do not use the unit if the ON/OFF switch does not function properly
b)
(does not turn on and off). Units that cannot be controlled by the switch
are unsafe, cannot operate, and must be repaired.
Disconnect the unit from the power supply before adjusting, cleaning,
c)
or servicing. This precaution reduces the risk of accidental start-up.
Keep unused equipment out of the reach of children and out of the
d)
reach of anyone unfamiliar with the unit or this instruction manual.
These units is dangerous in the hands of inexperienced users.
Keep the unit in good working condition. Check before each use for
e)
general damage or damage to moving parts (cracks in parts and
components or any other condition that may affect the safe operation
of the unit). If damaged, have the unit repaired before use.
Keep the unit out of the reach of children.
f)
Repairs and maintenance should be carried out by qualified personnel
g)
using only original spare parts. This will ensure the safety of use.
To ensure the designed operational integrity of the unit, do not remove
h)
factory-installed covers or loosen screws.
When transporting or moving the unit from storage to the place of use,
i)
observe the health and safety rules for manual handling applicable in
the country where the unit is used.
Avoid situations in which the machine stops under heavy loads during
j)
operation. This can cause overheating of the drive elements and
consequent damage to the equipment.