Warranty Terms - SmartGyro SMART-HELMET Manual Del Usuario

English
Only the PRO version incorporates a bluetooth module
8Ω300mW
applicable scope
Type Permanent-magnet dynamic loudspeaker
Dimensions 15.3*6.9 mm in diameter
Power Nominal input 300mW, maximum input 800mW
Mean working voltage
1.8 V
Working voltage
3.7 V
(maximum value)
Nominal Impedance 8Ω±15% test @200Hz 3 v
Resonant frequency
100~18,000Hz
Bluetooth version 4.1
Maximum Bluetooth transmission power
5dBm
Bluetooth frequency band
2402MHz-2480MHz
Maximum General 2.4GHz transmission power 0dBm
General 2.4GHz frequency 2438MHz
Sound pressure level (dB)
88~1kHz
Current consumption
200mA
(maximum value)
Distortion 5% less
Working temperature
-20~60C
Storage temperature
-30~+70C
Reliability
Must be normal after load test in pink noise,0.3W, for
Continuous load test
consecutively 48 hours
Must be normal after heat resistance test at 60±2℃and relative
Heat resistance test
humidity 20-25%16hours and then room temperature 1hour
Must be normal after cold resistance test at -20±3℃ and relative
40
Cold resistance test
humidity - %16hours and then room temperature 1 hour
Technical support and warranty information
If you have a problem with this product, we recommend that you first
read this manual in detail or go to our website www.smartgyro.es
where you can access "Frequently asked questions about the
product", "Troubleshooting", "Updates and Drivers" , "Manuals", etc ...
If the problem still persists, and before any procedure you deem
necessary, contact the distributor where you purchased the product,
always presenting the original purchase invoice for the product.

Warranty terms

1. Two-year warranty for our products, as long as each and every one
of the steps indicated in the processing procedure for the SAT
SMARTGYRO is carried out correctly, available at www.smartgyro.es
41