Before First Use; Contents Of Packing; Intended Use; Main Switch - Batavia BT-CAC001 Manual De Usuario

3. Before first use

Remove the machine and the accessories
from the packaging. Check the machine for
transport damage and do not use the
machine in case of damages. Keep the
packing materials away from children, risk
of suffocation!

4. Contents of packing

1× Cordless air compressor
1× Ball adapter
1× Airbed adapter
1× Tire valve adapter
1× Operating instructions

5. Intended use

The compressor is intended for filling bicy-
cle and motor vehicle tires and for inflating
toys, floats, balls and the likes. Additionally,
the compressor can be used to deflate toys,
floats, inflatable pools and the likes. The
compressor is not intended for filling lorry
or tractor tires. It is intended for domestic
used and not continuous commercial
operation.

6. Main switch

Set the main switch (2) to the "I" position to
turn on the low-pressure pump or the "II"
position to turn on the high pressure pump.
Set the main switch to the "O" / centre posi-
tion to turn off the compressor.
7. Operation of the high and low
pressure hoses
The compressor is equipped with a
high-pressure hose (6) and a low-pressure
hose (3). The high-pressure hose is for
inflating high pressure items like tires and
sports balls. The low-pressure hose is
designed for inflating or deflating low pres-
sure, high volume items like air rafts, mat-
tresses, and beach balls.
Note: Pressure gauge display and pre-set
features are used only in high pressure hose
applications.
8. Inflating with the high pressure
hose
• To inflate objects with compressed air,
use the compressed air hose (6).
• Connect the adapter of the compressed
air hose to the object you wish to
inflate.
• Depending on what you are inflating,
also use the adapters (17, 18, 19) or
other adapters available from retail
stores.
• The pressure at the compressed air
hose will be displayed in the display (1).
• The unit of the displayed pressure (psi/
bar/kPa) can be selected with the but-
ton (15).
• The button (14) allows the desired pres-
sure to be reduced.
• The button (16) allows the desired pres-
sure to be increased.
• Switch on the equipment by moving the
selector switch (2) to position II and
then press the start button (13).
• The compressor will then pump until
the pre-set pressure on the display is
reached, then it will switch off.
Note: The pressure readout on the gauge
while inflating ls a measurement of the
fluctuating pressure between the item and
the high pressure hose. To get an accurate
reading, stop inflating and follow above
instructions for reading the air pressure.
Warning! Observe the information supplied
by the tire manufacturer and the vehicle
manufacturer relating to the recommended
tire pressure.
Warning! This equipment is not calibrated!
For a calibrated measurement value, check
the actual tire pressure using a calibrated
meter after you have inflated the tires your-
self, e.g. at a petrol station.
Allow the compressor to cool down for
about 5 minutes after every 5 minutes of
operation in order to prevent overheating.
English
7