Shipment And Repositioning; Transportation And Changing Positioning; Repositioning The Door - EAS ELECTRIC EMC1852FW Manual De Instrucciones

• Make sure you have disconnected
the plug of your appliance before
cleaning the water tray.
• Remove the water tray from its
position by removing the screws (if
it has screws). Clean it with soapy
water at specific time intervals. This
will prevent odours from forming.
Replacing LED Lighting
To replace any of the LEDs, please
contact the
Service Centre.
Note: The numbers and location
of the LED strips may change
according to the model.
If product equipped with LED lamp
This product contains a light source
of energy efficiency class <E>.
If product equipped with LED Strip(s)
or LED card(s)
This product contains a light source
of energy efficiency class <F>.
nearest Authorised
6 SHIPMENT AND
REPOSITIONING
6.1 Transportation and Changing
Positioning
• The original packaging and foam
may be kept for re-transportation
(optional).
• Fasten your appliance with thick
packaging, bands or strong cords
and follow the instructions for
transportation on the packaging.
• Remove all movable parts or fix
them into the appliance
shocks using
positioning or transporting.
Always carry your appliance in
the upright position.

6.2 Repositioning the Door

• It is not possible to change the
opening direction of your appliance
door if door handles are installed on
the front surface of the appliance
door.
• It is possible to change the opening
direction of the door on models
with handle on the side of the door
or without handles.
• If the door-opening direction of
your appliance can be changed,
contact the nearest Authorised Ser-
vice Centre to change the opening
direction.
EN - 70
against
bands when
V.1
re-