How To Assemble - Lionelo education Arie Manual De Usuario

•
Keep the product away from sources of heat, high temperatures, hot surfac-
es, sources of ignition, naked flame, oil and sharp edges.
•
Store the bike in a dry place.
•
Do not use the product if weather is unfavorable (e.g. frost, rain, snow, black ice).
The safest areas for using the bicycle are those with little or no vehicular traffic, such
as private areas,playgrounds, schoolyards, and school playgrounds.
Product description (fig. 1)
1. Anti-skid arms
2. Handlebars
3. Saddle
4. Front fork
5. Crossbar
6. Rear wheel
7. Front wheel

How to assemble

1. Handlebars (fig. 2)
Remove the handlebars fixing ring (10) and front wheel fork cap (14) from the
front fork (4). Insert the front fork with wheel in the bike crossbar hole. Put these
items back on the protruding fork shank in the following order: front wheel fork
cap (14) and handlebars fixing ring (10). Next release the nut on the ring (14) and
insert the handlebars (2) in the front fork. Adjust the height of the handlebars
to the child's height - handlebars depth marker (9) cannot be visible, must be
inside the crossbar. Tighten up the nut on the ring (14) and cover it (8). Once
the process is completed, make sure the handlebars have been fixed securely. If
not - tighten up the nut on the ring until the stability is acceptable.
Note! When assembling, make sure the front fork with a wheel is assembled
in the crossbar properly. The bike should be assembled, disassembled and ad-
justed by an adult only.
2. Saddle (fig. 3).
Insert the saddle pipe in the saddle hole in the crossbar (12). Adjust the saddle
height to the child's height - saddle depth mark (11) cannot be visible, must
be inside the crossbar. Tighten up the nut on the saddle fixing ring (13). Once
the process is completed, make sure the saddle has been fixed securely. If not,
tighten up the nut on the ring until the stability is acceptable.
EN
8. Masking collar
9. Safety mark under handlebars
10. Clamping ring
11. Safety mark under saddle
12. Saddle hole in crossbar
13. Saddle fixing ring
14. Front wheel fork cap
‑ 4 ‑