Instructions for use and safety
1
General view:
2
Regulation: -Meets UNE EN 60730-2-7 regulations- Follow instructions to compliance with the R.D. 842/2002. - Installation, service and maintenance of the
electrical equipment may be carried out by anauthorized person only.-Controls the automatic opening and closing of a circuit according to a time schedule,
stored in memory and established by the user. Work with reserve to avoid deprogramming with power outages.
3
*Characteristics:-DIN RAIL Installation. -Advanced pre-setting one week before -Digital electronics general purpose time switch with daily and weekly programs -Repeat programs
with 16ON/OFF settings, 18 times pulse programs, and setting on/off manually. -Lithium battery power reserve when electric supply cut
time error correction ±30 sec, weekly.
4
Connection & technical data: LOAD
5
Instructions:
1.First time use this timer switch, please input power and let battery charge. After then press reset Key. 2.At first time, the timer switch is in 24h mode.If you want
change to 12h mode please press on"
3
Step Key
Programming
1
Setting 1 ON time(display 1 on)
Press
2
Press H+/M+
Set hours and minutes
3
Press D+
Select days of week. Same everyday, MO - FR,MO-SA,SA-SU,MO-WE,TH-
SA,MO WE FR, TU TH SA, different everyday.(If same everyday, not press
this key)
4
Setting 1 off time ,display 1 off
Press
5
Press H+/M+
Set hours and minutes
6
Press D+
If you want same set in every day,you need not press this key
7
Rep eat step 2 -6
Set 2-16 on/off time
8
End
Press
*If need not 16 pulse press" "key to the end.
5. Count down:("d" displays at bottom-left corner of LCD)
Step
Key
Programming
1
Press
&
Into count down
2
Press
&H+/M+
Setting min/sec
3
Press MANUAL
Start count down
4
Press
Return to start count down
5
Press P&
Exit
7. Auto time error correction, weekly:("7d" displays at
bottom-left corner of LCD)
Step
Key
Programming
1
Press &MANUAL Into count
2
Press D+
Setting 0sec-30sec
3
Press
Confirm
10. Check time: press " " to check whether the time is set correctly or not
Press "MANUAL" and then reset the time and week
Press " " to finish checking and setting, and the time will be display
afterwards
11.
12.
6
Technical information:
9
Management of packaging and product waste: PACKAGING WASTE; MATERIAL; PLASTIC; PAPER AND PAPERBOARD; DEPOSIT IN; YELLOW
CONTAINER; BLUE CONTAINER; LOGO IN SPAIN (NOTE); INTERNATIONAL LOGO (NOTE); LOGO IN FRANCE (NOTE); PRODUCT WASTE;
WASTE; WEEE; DEPOSIT IN; SELLING POINT; LOGO (NOTE).
NOTE: The color of the containers may vary depending on the country where it is applied. Check local regulations on this.
Mode d'emploi et de sécurité
1
Présentation:
2
Tension 842/2002.-Installation, entretien et maintenance des équipements électroniques ne peuvent être effectués que par de personnel autorisée. Contrôle
l'ouverture et la fermeture automatique d'un circuit selon un calendrier, stocké en mémoire et établi par l'utilisateur. Travailler avec réserve pour éviter la
déprogrammation avec des pannes de courant.
ºC)
8. Timing
8.1 Press
8.2 Press
9.
"MANUAL" in order to display at the bottom line of the LCD
.
Lamp load: 2000 W
4. PULSE setting:(" " displays at bottom - left corner of LCD).
Step
Key
1
Press H+ & M+
2
Press
3
Press
4
Press
5
Press H+/M+
6
Press D+
7
Repeat step 2- 3
8
Press
9
Press H+&M+
*If need not 18 pulse press" "key to the end.
6. Pause
Neither needn't the timer work nor delete the set program. You could just press and "MANUAL" for 3.
Seconds at the same time to make the timer "AUTO OFF" permanently (only can access when "ON
press
and "MANUAL" to restore "AUTO OFF", and the timer turn to work normally.
13. Press "RESET" to reset, but the settings can not be restored
NOTE
data is saved. It will quit when setting finished.
7
Product maintenance:
-Clean with a dry cloth.
-3-
off-Present time (ON OFF position). Auto
Programming
Into pulse setting
&H+/M+
Set ting pulse time range 1 sec - 59min 59sec
&MANUAL
Confirm pulse time range
Into setting 1 on time( display 1 on)
Setting on time
Select days of week. Same everyday, MO-FR,MO-SA,SA-SU,MO -WE,TH-
SA,MO WE FR, TU -TH-SA, different everyday.(If same everyday, not press
this key)
Setting 2 - 18 pulse
End
Exit pulse
8
Safety and usage tips.
ENGLISH
ºC
FRANÇAIS