Maintenance And Service; Accessories; Storage; Environmental Protection - Narex CPK 65 Instrucciones De Uso

Maintenance and service

Instructions for Cleaning the Machine
Blow away dirt and dust from the tool's vents when the motor is
running� Use protective glasses when doing this� You can clean ex-
terior plastic parts with a moistened cloth and a mild detergent�
Though these parts are made of materials resistant to solvents, DO
NOT use solvents to clean them�
Instructions for cleaning the charger
Attention! Risk of electric shock. Prior to start handling
the charger, disconnect the line plug from the socket!
Impurities and dust can be removed from external charg-
er surfaces by a rag or a non-metal brush� Use neither water nor
detergents�
Attention! With respect to protection from el. shock
and preservation of the class of protection, all mainte-
nance and service operations requesting jig saw case
removal must be performed by the authorized service
centre only!
The current list of authorized service centres can be found at our
website www.narex.cz, section "Service centres"�

Accessories

The accessories recommended for use with this device are availa-
ble commercially in the shops with hand el� tools�

Storage

Packed appliance may be stored in dry, unheated storage place
with temperature not lower than -5 °C�
Unpacked appliance should be stored only in dry storage place
with temperature not lower than +5 °C with exclusion of all sudden
temperature changes�

Environmental protection

Power tools, accessories and packaging should be sorted for envi-
ronmental-friendly recy�
Only for EU countries:
Do not dispose of power tools into household waste!
According to the European Directive 2002/96/EC on waste electri-
cal and electronic equipment and its incorporation into national
law, power tools that are no longer suitable for must be separate-
ly collected and sent for recovery in an environmental-friendly
manner�

Warranty

Our equipment is under warranty for at least 12 months with re-
gard to material or production faults in accordance with national
legislation� In the EU countries, the warranty period for exclusively
private use is 24 months (an invoice or delivery note is required as
proof of purchase)�
Damage resulting from, in particular, normal wear and tear, over-
loading, improper handling, or caused by the user or other dam-
age caused by not following the operating instructions, or any
fault acknowledged at the time of purchase, is not covered by the
warranty�
Complaints will only be acknowledged if the equipment has not
been dismantled before being sent back to the suppliers or to an
authorised NAREX customer support workshop� Store the operat-
ing instructions, safety notes, spare parts list and proof of purchase
in a safe place� In addition, the manufacturer's current warranty
conditions apply�
Note
Due to continuous research and development work, we re-
serve the right to make changes to the technical content of this
documentation�

Certificate of Conformity

CPK 65:
We declare that the device meets requirements of the following
standards and directives�
Safety:
EN 60745-1:2015
EN 60745-2-5:2014
Directive 2006/42/EC
Electromagnetic compatibility:
EN 55014-1: 2017
EN 55014-2: 2015
Directive 2014/30/EU
RoHS:
Directive 2011/65/EU
Place of storage of the technical documentation:
Narex s�r�o�, Chelčického 1932, 470 01 Česká Lípa, Czech Republic
2021
Narex s�r�o�
Chelčického 1932
470 01 Česká Lípa
English
Jaroslav Hybner
CEO of the company
Marec 1, 2021
23