Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DO NOT CONTINUE using this product with its battery pack in a depleted condition.
(NOTE: After several charge and discharge cycles, the battery will attain full capacity.)
6. To prolong battery life, avoid leaving the battery pack on charger for extended
periods of time (over 30 days without use). Although overcharging is not a safety
concern, it can significantly reduce overall battery life.
7. The battery pack will reach optimum performance after being cycled 5 times
during normal usage. There is no need to run the batteries down completely before
recharging. Normal usage is the best method of discharging and recharging the
batteries.
MOUNTING AND OPERATION
Selecting a Saw Blade
Use only saw blades suitable for the material being worked.
An overview of recommended saw blades can be found at the beginning of these
instructions. Do not use other blades than recommended.
Use a thin saw blade for narrow curve cuts.
Inserting/Replacing the Saw Blade(Fig.2)
WARNING: Remove battery from reciprocating saw before inserting/replacing the
saw blade. Severe injury or death could occur from body contact with moving
Fig.2
blade.
Publicidad
Tabla de contenido
