Environmental Protection - BGS technic 86690 Instrucciones De Uso

COMPONENTS
1 Burner
2 Gas valve
3 Piezo igniter
4 Cartridge holder
5 Screw cap
INSTALL / REPLACE CARTRIDGE
1. Close the gas valve. Never replace the cartridge when the device is
switched on.
2. Make sure that the gas cartridge to be replaced is completely empty
before installing a new one. When the device is turned off, shake the
device to ensure that there is no more liquid in the cartridge.
3. Turn the screw cap (5) on the underside of the cartridge holder (4)
counterclockwise.
4. Insert a new gas cartridge (6) into the screw cap (5) and turn the
screw cap (5) clockwise into the cartridge holder (4).
APPLICATION
1. Open the gas valve a little.
2. Press the button of the piezoelectric igniter.
3. After igniting, set the required flame using the gas valve.
MAINTENANCE / STORAGE
Check the device for leaks before and after use.
•
Let the device cool down before storing it.
•
• Store the device in a place protected from dust and moisture.
Keep the device out of the reach of children.
•

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment.
DISPOSAL
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment. Contact your local solid waste authority for
recycling information or give the product for disposal to BGS technic KG or to an electrical
appliances retailer.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed