Mounting The Control Knobs; Parts Required; Set-Up For Gas Cylinder - Pit Boss PB757GS Manual De Instrucciones

7. MOUNTING THE CONTROL KNOBS

Parts Required:

4 x Control Knob (#4)
Installation:
• Mount each Control Knob to the front panel of the unit.

8. SET-UP FOR GAS CYLINDER

Installation:
• Drop the upper gas cylinder hook into the correct position for usage.
Note steps as shown in illustration 8A.
• Unfold the lower gas cylinder bracket into the correct position for
usage. Note steps as shown in illustration 8B.
• The unit is now completely assembled.
6
7
4
4
4
4
8A
8B