TEFAL PRO STYLE ONE IT24 Serie Manual De Instrucciones página 150

Ocultar thumbs Ver también para PRO STYLE ONE IT24 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 161
TROUBLESHOOTING
Problems
There is no steam.
The steam flow is
low.
Water runs through
the holes of the
steam head.
The steamer takes
a long time to heat
and/or ejects white
particles.
ENVIRONMENTAL PROTECTION FIRST !
i Your appliance contains valuable materials which can be recovered or recycled.
 Leave it at a local civic waste collection point.
6
Possible causes
The appliance has not
been turned on.
The hose has been
obstructed.
There is no water left in
the water tank.
The steam is not ready yet.
Your steamer has a
build-up of scale because
it has not been rinsed out
regularly.
The hose has been
obstructed.
There is no water left in
the water tank.
There is condensation in
the hose.
Your steamer has a
build-up of scale
because it has not been
descaled
regularly.
Solutions
Check that the appliance has been
plugged in correctly. Next press the
On/Off pedal, the power indicator
light located at the front of the
appliance will come on.
Check that the hose is not bent or
twisted.
Switch off the device and fill the water
tank.
The appliance will produce steam
about 45 seconds after it has been
switched on.
See descaling process (Cleaning
paragraph).
Check that the hose is not bent or
twisted.
Switch off the appliance and fill the
water tank.
Never use a steamer in the horizontal
position. Hold the hose vertically
outstretched and wait for the
condensed water to return to the
steamer.
See descaling process
(Cleaning paragraph).

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pro style one it2461e0

Tabla de contenido