Before First Use; Operating - ECRON WK8283B Manual De Usuario

FEATURES OF WATER KETTLE
Lid
Body
Window
18

BEFORE FIRST USE

Before first use, it is
recommended to operate the kettle
for 2 or 3 times and discard the
water following the instructions
below. This will remove any dust
or residues remaining inside the
appliance from the manufacturing
Handle
process.
Cover

OPERATING

INSTRUCTIONS
Switch-
Button
• Take up the kettle from the
base before filling.
• To fill the kettle, open the
Base
cover by pulling the lid
handle inwards , then fill
to the desired level (min0.
75L-Max.1.7L), close the lid by
pressing it down until it clicks
into place.
• Place the kettle on the power
base and plug it into the main.
Place the kettle in such a way
that its spout is turned away
from you.
• Press the ON/OFF switch
lever to position "I", the power
indicator lights up and the
water will start to heat.
• When the water has boiled the
kettle will automatically switch
itself off. The switch will
return to position "0" and the
power indicator will go out.
• Remove the kettle from the
power base and pour the
water.
• NOTE. Handle with care when
pouring water because it could
scald.
• You can stop the boiling
process at any time by lifting
the On/Off switch.
EN
19